|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A.G. ANDERSON LTD |
STEEL CASTINGS - TECHNICAL DATA |
SECTION #4 (cont'd) - Corrosion & Heat Resisting Stainless Steels, Tool Steels and Nickel Based Alloys |
|
|
|
|
|
|
|
|
|
|
|
|
|
Rev. 4 |
|
|
|
7 |
|
| ALLOY |
ASTM |
CHEMICAL COMPOSITION |
MINIMUM MECHANICAL PROPERTIES |
EQUIVALENT FOREIGN SPECS |
CHARACTERISTICS & APPLICATIONS |
|
| |
SPECIFICATION |
(MAXIMUM UNLESS RANGE SPECIFIED) |
CHARPY |
TENSILE |
YIELD |
ELONG |
|
BRITISH |
GERMAN |
USA |
|
|
| |
|
|
C |
Si |
Mn |
Ni |
Cr |
Mo |
OTHER |
"V" NOTCH |
STRENGTH |
STRENGTH |
|
HARDNESS |
STANDARD |
STANDARD |
WROUGHT |
|
|
| |
|
|
% |
% |
% |
% |
% |
% |
% |
FT LB |
K.S.I. |
K.S.I. |
% |
|
BS3100 |
DIN 17445 |
AISI STD |
|
|
| NICKEL BASE |
A494: CZ-100 |
1.00 |
2.00 |
1.50 |
95.00 |
|
|
CU 1.25 |
|
50 |
18 |
10 |
90-140 BHN |
|
|
|
High resistant to caustic soda & alkaline salts. |
|
| CORROSION |
|
|
|
|
|
MIN |
|
|
FE 3.00 |
|
|
|
|
|
|
|
|
|
|
| RESISTANT |
A494: M-35-1 |
0.35 |
1.25 |
1.50 |
BAL. |
|
|
Cu 26.0-33.0 |
|
65 |
25 |
25 |
|
|
|
|
Excellent resistance to organic acids, alkalis, salt-solutions & sea water. |
|
| ALLOYS |
|
|
|
|
|
|
|
|
Fe 3.5 |
|
|
|
|
|
|
|
|
|
|
| |
A494: M-35-2 |
0.35 |
2.00 |
1.50 |
BAL. |
|
|
Cu 26.0-33.0 |
|
65 |
30 |
25 |
|
|
|
|
Order M-35-1 or M-30C when weldability is required |
|
| |
|
|
|
|
|
|
|
|
Fe 3.5 |
|
|
|
|
|
|
|
|
|
|
| |
A494: M-30-H |
0.30 |
2.70-3.70 |
1.50 |
BAL. |
|
|
Cu 27.0-33.0 |
|
100 |
60 |
10 |
243-294 BHN |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
Fe 3.5 |
|
|
|
|
|
|
|
|
|
|
| |
A494: M-25-S |
0.25 |
3.50-4.50 |
1.50 |
BAL. |
|
|
Cu 27.0-33.0 |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
Fe 3.5 |
|
|
|
|
|
|
|
|
|
|
| |
A494: M-30C |
0.30 |
2.00 |
1.50 |
60.00 |
|
|
Cu 26.0-33.0 |
|
65 |
32.5 |
25 |
125-180 BHN |
|
|
|
|
|
| |
|
|
|
|
|
MIN |
|
|
Fe 3.5 Cb 3.0 |
|
|
|
|
|
|
|
|
|
|
| |
A494: N-12MV |
0.12 |
1.00 |
1.00 |
61.00 |
1.00 |
26.0-30.0 |
Fe 4.0-6.0 |
|
76 |
40 |
6 |
180-220 BHN |
|
|
|
Excellent corrosion resistance to reducing acids (sulphonic, hydrochloric, chlorides) & reducing |
|
| |
|
|
|
|
|
MIN |
|
|
V 0.20-0.60 |
|
|
|
|
|
|
|
|
salts. Applications include pumps, impellers, casings & diffusers. |
|
| |
A494: N-7M |
0.07 |
1.00 |
1.00 |
BAL. |
1.00 |
30.0-33.0 |
Fe 3.00 |
|
76 |
40 |
20 |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A494: CY-40 |
0.40 |
3.00 |
1.50 |
BAL. |
14.0-17.0 |
|
Fe 11.0 |
|
70 |
28 |
30 |
|
|
|
|
This nickel base alloy has properties comparable to the wrought grade: Inconel 600. Resistant to reducing |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
environments. It has excellent temperature strength and creep properties. Used in chemical processs, heat , heat |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
treating, power and electronic equipment. |
|
| |
A494: CW-12MW |
0.12 |
1.00 |
1.00 |
48.00 |
15.5-17.5 |
16.0-18.0 |
Fe 4.5-7.5 |
|
72 |
40 |
4 |
220-280 BHN |
|
|
|
Excellent resistance to oxidizing & mixed acids containing halogens & reducing salts. Applications |
|
| |
|
|
|
|
|
MIN |
|
|
W 3.75-5.25 |
|
|
|
|
|
|
|
|
also include pumps, impellers & casings. |
|
| |
|
|
|
|
|
|
|
|
V 0.20-0.40 |
|
|
|
|
|
|
|
|
|
|
| |
A494: CW-6M |
0.07 |
1.00 |
1.00 |
BAL. |
17.0-20.0 |
17.0-20.0 |
Fe 3.0 |
|
72 |
40 |
25 |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A494: CW-2M |
0.02 |
0.80 |
1.00 |
BAL. |
15.0-17.5 |
15.0-17.5 |
Fe 2.0 |
|
72 |
40 |
20 |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A494: CW-6MC |
0.06 |
1.00 |
1.00 |
BAL. |
3.15-4.50 |
8.0-10.0 |
Fe 5.0 |
|
70 |
40 |
25 |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| CHROMIUM- |
A560: 50CR-50NI-CB |
0.10 |
0.50 |
0.30 |
BAL |
47.0-52.0 |
|
FE 1.0 |
|
80 |
50 |
5 |
|
|
|
|
Very good resistance to corrosive environments and elevated-temperatures. Applications include |
|
| NICKEL ALLOYS |
|
|
|
|
|
|
|
|
CB 1.4-1.7 |
|
|
|
|
|
|
|
|
structural members, containers, supports, hangers and spacers. |
|
| |
A560: 50CR-50NI |
0.10 |
1.00 |
0.30 |
BAL |
48.0-52.0 |
|
FE 1.0 |
|
80 |
50 |
5 |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
N 0.30 |
|
|
|
|
|
|
|
|
|
|
| |
A560: 60CR-40NI |
0.10 |
1.00 |
0.30 |
BAL |
58.0-62.0 |
|
FE 1.0 |
|
110 |
85 |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
N 0.30 |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
QUALITY CASTINGS UP TO 5500 LBS IN CARBON STEEL * LOW ALLOY STEEL * WEAR & HEAT RESISTING STEEL |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* STAINLESS STEEL * DUCTILE IRON * NIHARD & NIRESIST * GRAY IRON |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Complete Pattern Making Facilities (wood, metal, plastic) |
|
|
|
|
|
|
|
|
|
|
|
Complete Machining Facilities, C.N.C., CAD/CAM, C.M.M. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
